Kenwood KDW243A/A

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Kenwood KDW243A/A

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • August 16, 2012 at 5:11 pm #70992
    maltheviking
    Participant

    What a piece of Chinese Shyte 😥
    Anyway I went to one of these today after I said I would never do another one again.

    Machine fills ok, dispenser opens but no wash motor.
    Checked the motor/capacitor wiring etc, no probs.
    Anyone come across this before before I order a new module?

    August 17, 2012 at 8:31 am #379553
    maltheviking
    Participant

    Re: Kenwood KDW243A/A

    Anyone?

    August 17, 2012 at 9:27 am #379554
    Muv
    Participant

    Re: Kenwood KDW243A/A

    Had a few of these where the motor seems to check out ok..but have put another one in and machine worked fine…and a few with dodgy module…

    Martin

    August 20, 2012 at 4:26 pm #379555
    maltheviking
    Participant

    Re: Kenwood KDW243A/A

    No Voltage to motor so I have got new module to try,

    August 20, 2012 at 6:18 pm #379556
    RickT
    Participant

    Re: Kenwood KDW243A/A

    Might be bad connection to/or flow meter on the air breather (behind side panel). Had exact fault with Bosch and Beko dishwashers.

    August 20, 2012 at 7:01 pm #379557
    maltheviking
    Participant

    Re: Kenwood KDW243A/A

    RickT wrote:Might be bad connection to/or flow meter on the air breather (behind side panel). Had exact fault with Bosch and Beko dishwashers.

    I cant see the flow meter a problem, machine fills ok and opens the dispenser,though I did check it.

    October 24, 2015 at 6:55 am #379558
    eng14
    Participant

    aeg f55002v10p/911436014/02

    hi guys,went to this d/w fault was no fill.base dry,had aqua with me and changed,no joy.just pumps out stops then pumps out again,richard 😕

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.