Bosch integrated dishwasher SGV 43A03 water not heating

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch integrated dishwasher SGV 43A03 water not heating

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 25, 2012 at 9:03 pm #71147
    hbrac
    Participant

    Hi guys.
    I noticed that the dishwasher had been running for hours. On closer inspection it appears that the water inside is not heating.The dishwasher tablet has been dispensed but the machine just keeps washing.I have had to press the two reset buttons to get it to stop and bail out the water.
    I presume that there is a problem with the heating unit? Can anyone give me an idea of the fault and cost to repair.
    Thanks

    Hilary

    September 2, 2012 at 8:00 pm #380144
    linrew
    Participant

    Re: Bosch integrated dishwasher SGV 43A03 water not heating

    there is usually 3 reasons for these not to heat

    1 heater fault. test the heater with a meter to check this.

    2 module not sending power to heater. remove module and visually check to see if any bad/dry joints.

    3 not enough water getting into appliance therefore not activating the heater, remove and clean pressure chamber.

    hope this helps

    September 2, 2012 at 8:55 pm #380145
    hbrac
    Participant

    Re: Bosch integrated dishwasher SGV 43A03 water not heating

    Hi linrew
    Thanks for your interest. It was the module so, although it cost me mega bucks for a new one, it’s now up and running again.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.