- This topic has 2 replies, 2 voices, and was last updated 13 years, 7 months ago by
.
-
Posts
-
I have been at this all weekend! It started with the usual, won’t drain, I took the drain pump out and found a shard of glass in it. Put it all back togather, turned it on, and as I slid the machine back into its position I noticed the On and Rinse Aid lights on the display flickered. You know kind like a loose wire. They came back on and I did a test run. This went OK until the last drain when it again refused to drain. Had it all apart again, and yes, another shard of glass. Cleaned it out thoroughly, put it back togather, but this time no lights at all. I have 240volts to the controller board, but nothing displayed. Can anyone give me some hope that it might not be the controller? I’m afraid I am lost without a circuit diagram. Thanks for reading this and any help that you may offer. I am off now for a big beer!(or slit my wrists)
Jim
Re: Bosch Dishwasher SGS43C12GB No Lights!
Hi Jim
I’m affraid as you suspect it will almost certainly be the pcb which is at fault if you have a good supply to it. 🙁
Nige
- You must be logged in to reply to this topic.