- This topic has 1 reply, 1 voice, and was last updated 13 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Bosch with the plastic outer drum in two parts which has possibly 8 screws joining two outer drums but also a couple of dozen clip in lugs,appears to part with a screwdiver wedged in,is it possible to change the bearings and if so whats the best way to split drums without breaking too my lugs?
Or possibly butcher the front half of the outer drum off and replace that as well as bearings
Or similar and use additional bolts in previously unused holes :con:
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.