Bosch SGS43A32UK/01 fd8211

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS43A32UK/01 fd8211

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 3, 2012 at 2:26 pm #71783
    rocker
    Participant

    fitted a new pump a few days ago, I left the drain hose loose, so water came out and flooded the base, I have been back & dried the base, but now the pump runs continually tried to hold in reset and different programs no joy, can anyone please advise me, I feel there my be a electronic fault !!
    thanks John

    October 3, 2012 at 5:30 pm #382341
    Martin
    Participant

    Re: Bosch SGS43A32UK/01 fd8211

    Is the float micro switch operating OK? And the polystyrene float seated OK?

    October 3, 2012 at 5:56 pm #382342
    rocker
    Participant

    Re: Bosch SGS43A32UK/01 fd8211

    Martin, I disconnected the plug to float mirco switch & pump still runs.
    haven’t checked mirco ! but there wasn’t a fault on it before as I changed the pump due to drain fault.
    john

    October 4, 2012 at 7:33 am #382343
    Martin
    Participant

    Re: Bosch SGS43A32UK/01 fd8211

    Then I would suggest you look for a blown pump triac on the PCB. 🙁

    October 4, 2012 at 12:18 pm #382344
    rocker
    Participant

    Re: Bosch SGS43A32UK/01 fd8211

    Martin, thanks for your reply, is it something I could repair myself. or would it be to difficult to obtain parts ect.. thanks John

    October 4, 2012 at 12:23 pm #382345
    rocker
    Participant

    Re: Bosch SGS43A32UK/01 fd8211

    Martin,
    up date on this PCB customer has brought a new dishwasher.
    John

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.