Hotpoint Ultima SDW80 problems!

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hotpoint Ultima SDW80 problems!

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 3, 2012 at 2:55 pm #71786
    smabacon
    Participant

    Hi all, first post.
    Im moving out of my rented flat in 2 weeks, and our Hotpoint Ultima SDW80 dishwasher is giving me trouble. I’l open the door mid cycle, the air inside is hot and there’s hot condensation on the top and sides of the machine, but the pool of water at the bottom is stone cold. The rotor blades haven’t moved an inch, Meaning my dishes are still filthy. I’ve taken the rotor blades off and given them a rinse under the tap without issue.

    Sometimes it will stop the cycle with an error message of AL10, but that code isn’t in the manual! Please help!

    October 3, 2012 at 3:18 pm #382356
    iadom
    Moderator

    Re: Hotpoint Ultima SDW80 problems!

    AL10 is a heating circuit fault, very common on these Indesit dishwashers, could be heating element, connections, module, relay.

    That should not stop the spray arms from moving, it could be that the main circulation pump is failing as well. 🙁

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.