Zannussi ZWF1632W Motor

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zannussi ZWF1632W Motor

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 10, 2012 at 4:08 pm #71900
    stotta
    Participant

    Hi

    My washer has stopped spinning.
    I have taken the motor off.
    The drum spins freely.

    The motor smells like it may be a bit burnt?

    Putting my multimeter on to the wires going into the motor (Motor disconnected), i momontarily get 110v when it should spin.

    With the motor reattached, when it should spin it tries to spin then stops.

    The motor spins freely when not doing anything.

    Is the motor goosed?

    Thanks

    October 10, 2012 at 4:33 pm #382742
    stotta
    Participant

    Re: Zannussi ZWF1632W Motor

    No error codes or flashes.

    October 10, 2012 at 8:48 pm #382743
    Seamy
    Participant

    Re: Zannussi ZWF1632W Motor

    Would’nt really advise live testing. Have you checked the motor carbon brushes for wear, hopefully new brushes will cure the problem, motor would be very expensive. Part num’ is 1246179061. It should flash 5 times if the motor doesn’t turn as an error code.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.