- This topic has 4 replies, 2 voices, and was last updated 13 years, 5 months ago by
.
-
Posts
-
Hi, I have the above washing machine which appears to have a faulty door switch (if you bang the door switch hard the power light plashed on/off and machine starts/stops).
Can anyone advise me if it would be the door switch or any other part. Advise part number if possible.
Re: Creda 1st Choicw, Model W1003 Faulty Door Switch?
Check the door catch on inside of door, this should be sprung loaded and you should feel some restiance when you operate the door release handle. If this check out the it sounds like you need a new door interlock… Readily available from uk whitegoods..
Martin
Re: Creda 1st Choicw, Model W1003 Faulty Door Switch?
Many thanks for that. It is a friend washing machine, so I will have to go round and look at it. I assume it is easy to fit if it is the interlock. I have worked on my Hotpoint and had the front of that without any issues.
Re: Creda 1st Choicw, Model W1003 Faulty Door Switch?
Easy to fit. Remove metal band from around rubber seal, then gently pull seal away.. Then hand in behind interlock, whilst you undo it’s mounting screws…
then take a note of where the wires go, then replace with the new one and re assemble in reverse order…
Martin
- You must be logged in to reply to this topic.