Panasonic na-148va2 washing machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Panasonic na-148va2 washing machine

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 22, 2012 at 7:40 pm #72086
    mbdas
    Participant

    Hi been to this for the second time in 6 weeks and both times it’s the same fault the door seal keeps coming off but can’t see any fault with it other than there’s not much holding it in place. Has anyone had any luck in getting the door seal to stay on?
    Thanks mark

    October 23, 2012 at 6:55 am #383405
    Seamy
    Participant

    Re: Panasonic na-148va2 washing machine

    Think you can tighten the spring to another hole.
    Check suspension as it may be moving about too much & causing strain on the Wringer Frame Packing, the bottom pins in the shocks can wear causing excessive movement.

    October 23, 2012 at 10:53 am #383406
    mbdas
    Participant

    Re: Panasonic na-148va2 washing machine

    Yes I did fit the spring into the second hole making it tighter the second time I called but it still came off after a week or two, but I’ve not checked the the suspension leg so will
    Have another look at them when I got back with a new seal.
    Thanks mark

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.