Zwd16270w1

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zwd16270w1

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 23, 2012 at 8:01 am #72094
    Payney
    Participant

    Hi. I have been out to this one and the fault is the machine is totally dead with no display. Have got power to the main board but not sure if this is likely to be faulty or if the power runs through the dryer board before the display. Any ideas much appreciated before I purchase the expensive module to find I should be looking elsewhere.

    Thanks in advance.

    Mark

    Sent from my iPad using Tapatalk HD

    October 23, 2012 at 8:35 am #383421
    Seamy
    Participant

    Re: Zwd16270w1

    Main p.c.b i’d reckon is at fault.
    Check you have voltage on U3 1&2 which is the power imput connections to board, check on/off selector switch works, also check connections to small p.c.b display.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.