Beko CF6914W over freezing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko CF6914W over freezing

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 30, 2012 at 4:43 pm #72249
    djohnston
    Participant

    Could anyone help with the above model?, fridge is over freezing , I have changed the control board at the back along with the partitiometer board in the fridge but still the same fault , its as if there is a thermistor fault but it is foamed into the back wall , any help would be appreciated.

    October 30, 2012 at 8:30 pm #383946
    martinm
    Participant

    Re: Beko CF6914W over freezing

    im curious to know as well because ive had two last week same symptoms, ordered board at top back for both one worked ok and one is still freezing so ive ordered another of the same board hoping that one of the new boards was faulty. wondering if anyone has seen the inside potentometer board cause this overfreeze in fridge or is there a foamed in thermister

    November 3, 2012 at 10:59 am #383947
    djohnston
    Participant

    Re: Beko CF6914W over freezing

    turned out to be the thermistor part number 4216602785 that is foamed into the back wall that was faulty , cut into the back replaced it and it works fine .

    November 3, 2012 at 6:23 pm #383948
    martinm
    Participant

    Re: Beko CF6914W over freezing

    where abouts on the back wall is easy accessable

    November 4, 2012 at 1:57 pm #383949
    djohnston
    Participant

    Re: Beko CF6914W over freezing

    I cut a hole directly in the middle of the sides and about 30 cms from the top a dug out the insulation until I found it , it slides into a bracket a bit like the candy / Hoover thermistors , pretty straight forward

    November 6, 2012 at 8:36 pm #383950
    martinm
    Participant

    Re: Beko CF6914W over freezing

    where did you source a new thermister from?

    November 7, 2012 at 9:03 am #383951
    djohnston
    Participant

    Re: Beko CF6914W over freezing

    Direct from Beko

    November 8, 2012 at 7:00 pm #383952
    martinm
    Participant

    Re: Beko CF6914W over freezing

    spoke to beko today but the part number they gave me was for a therostat and theres not one on it. would you have the part number for that part please

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.