- This topic has 3 replies, 2 voices, and was last updated 13 years, 5 months ago by
.
-
Posts
-
Last night my Competence Range oven ( unsure of model number but PNC 943254248) won’t get up to temperature after being on for a good hour on the mode Fan/Upper/Lower . What I mean by that is the oven was set to 200 but never managed past 150 ( noted by dialling back the temp gauge till the orange light went out )
So I did some tests and after the oven had cooled I put it back on with just the upper element on and this almost got up to 200 after about half an hour.
I then did the same test with only the lower element but after half an hour the oven temperature had only got to about 10…..
So I assume my fault is with the Bottom Oven heating Element but I can’t work out how to get to it.Can you help ? Does my trouble shooting make sense ?
I’ve googled alot and no one seems to have a problem with this element and it’s always the fan element
Thanks for any help
Si
Re: AEG Competence – How do I change Bottom Oven Heating Ele
Power off, oven out, back panel off, access then obvious.
Re: AEG Competence – How do I change Bottom Oven Heating Ele
Brilliant. Thanks Martin for the super fast reply.
I’ll try that tonight and test the element.
Si
Re: AEG Competence – How do I change Bottom Oven Heating Ele
Just a quick follow up no this, you were right of course, once the back was off I could see the back of the element fitting and removed 2 screws/power connectors and it just slid out.
The element was split so definitely the problem so I’ve ordered a new one
Thanks again
Si
- You must be logged in to reply to this topic.