Indesit Iwd61450

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit Iwd61450

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 31, 2012 at 5:05 pm #72272
    rocker
    Participant

    I have been asked to replace a drum lifter on this machine, never fitted these before, is it just a push fit, do they lock somehow !! thanks John

    October 31, 2012 at 5:18 pm #384022
    Muv
    Participant

    Re: Indesit Iwd61450

    Ususally just slots in and you slide it to the front of drum…needs
    a fair bit of force sometimes.. But they will click in to place

    Martin

    October 31, 2012 at 6:00 pm #384023
    madangler1
    Participant

    Re: Indesit Iwd61450

    There is a metal talb that locks the lifter on, this needs to be bent up and angled so that when you push it on it clips behind the plastic rib, I then put a thin screwdriver through the hole above it when it on and try and put it up further to make sure it stays on.

    Some times if the customer continue to use it with out the lifter the metal talb snaps off. I then drill an should it with a stainless screw in the lip of the lifter.

    Been doing it for years like this.

    October 31, 2012 at 6:09 pm #384024
    rocker
    Participant

    Re: Indesit Iwd61450

    Thanks Gents. John

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.