CDA Dishwasher WC130 (Whirlpool)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › CDA Dishwasher WC130 (Whirlpool)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 2, 2012 at 2:31 pm #72307
    mjhservices
    Participant

    CDA Dishwasher WC130 (Whirlpool)
    Drains, then fills, then the motor kicks in and runs for about 5 seconds stops for 2 seconds runs for 5 seconds stops for 2 seconds etc for about 5 or 6 times and then drains and then 3 short bleeps and 1 long bleep.
    No more bleeps or flashing lights, dishwasher finished.
    ???????

    November 3, 2012 at 3:35 pm #384128
    electrofix
    Moderator

    Re: CDA Dishwasher WC130 (Whirlpool)

    sound like a board power supply problem

    see here

    trade-technical/simple-pcb-repair-tips-t51155.html

    for more info

    Dave

    November 4, 2012 at 11:48 am #384129
    mjhservices
    Participant

    Re: CDA Dishwasher WC130 (Whirlpool)

    Thanks Dave
    Mark

    November 10, 2012 at 12:03 am #384130
    agwarn
    Participant

    Re: CDA Dishwasher WC130 (Whirlpool)

    Might be obvious but check spray arms are not blocked and turning. The pump will pick up the extra load if the arms are blocked and pulse.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.