Smeg DI409CA Fill tank

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Smeg DI409CA Fill tank

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 6, 2012 at 7:28 pm #72383
    johnnyj
    Participant

    Does anybody know the part n/o for the fill tank on the right hand side off the appliance for a DI409CA dishwasher, water is peeing from it as it fills so assume it must be split cheers JJ

    November 6, 2012 at 11:33 pm #384381
    aqualectric
    Participant

    Re: Smeg DI409CA Fill tank

    Usually it’s the ‘O’ rings that fail. Can be fixed by changing them or alternatively using extra smaller thickness ‘O’ rings to take up the slack. Add them to the airbox pipes before refitting the originals; trial and error until the airbox is a tight fit and the latch holds it down with no slack at all. If it still leaks then the venturi inside the airbox is furred up with scale – virtually impossible to clear.

    Worth a try first!!

    Steve.

    November 9, 2012 at 6:32 pm #384382
    eastlmark
    Moderator

    Re: Smeg DI409CA Fill tank

    766610150 is the number of the air break, does not come with afformentioned o rings which are part number 754131307

    November 9, 2012 at 8:11 pm #384383
    johnnyj
    Participant

    Re: Smeg DI409CA Fill tank

    Thanks guys.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.