INDESIT IS70C DRYER

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › INDESIT IS70C DRYER

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 10, 2012 at 8:05 pm #72461
    johnmac11
    Participant

    I have been asked by a friend to find out a diagnosis for a problem he has with his dryer.

    He said it sounds as if the pulley is slipping on a shaft for a few seconds when it starts to rotate it does the same when it goes into reverse mode, is this a motor fault??

    thanks

    John

    November 10, 2012 at 8:08 pm #384580
    BobHope
    Participant

    Re: INDESIT IS70C DRYER

    classic rear fan loose on the motor shaft.

    Bob.

    November 10, 2012 at 8:09 pm #384581
    iadom
    Moderator

    Re: INDESIT IS70C DRYER

    Never changed a motor on one John, usually faulty jockey pulley or belt(or both).
    Or loose fan.
    Jim.

    November 10, 2012 at 8:11 pm #384582
    johnmac11
    Participant

    Re: INDESIT IS70C DRYER

    Thanks Guys,

    Will pass the info on.


    John

    November 10, 2012 at 9:39 pm #384583
    timdowning
    Participant

    Re: INDESIT IS70C DRYER

    In agreement with above but did have one this week with play in the motor as well as loose fan & worn tension pulley. What a heap of junk these are!!!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.