Samsung RS21DGrs

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Samsung RS21DGrs

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • November 14, 2012 at 9:38 am #72514
    PGS
    Participant

    Customer states fridge is not getting cold, then works ok sometines. Fan is making noise so ice build up present, is this a sensor or fan fault or maybe both, cheers guys.

    November 16, 2012 at 9:54 pm #384732
    tj5793
    Participant

    Re: Samsung RS21DGrs

    Defrost heaters need checking first then sensors

    November 17, 2012 at 8:48 am #384733
    PGS
    Participant

    Re: Samsung RS21DGrs

    Thanks TJ, defrost heater tested fine, I learnt that the sensor at bottom right hand side was being repositioned by samsung to top left just before bend in evaporater tube. Ive done this and left on test. Will report back.

    November 17, 2012 at 9:52 am #384734
    chezza
    Participant

    Re: Samsung RS21DGrs

    Unless that “sensor” has 2 yellow wires, you need to refit it to original position asap ; on the rs21, the only component at the bottom r/h side ( cable tied at the back of the evaporator) is the thermal fuse, and if you have put this where you state, is not going to protect the appliance.
    the moving of sensor relates to the later RSH1 series, and involves moving the defrost sensor (2 yellow wires) from top right to top left of the evaporator

    November 18, 2012 at 10:14 am #384735
    tj5793
    Participant

    Re: Samsung RS21DGrs

    As above the thermal cut out should not be moved if you do there will be no protection for the defrost. Has the thermal fuse failed? Is the fan motor working ok? The yellow wired sensor should be replaced for a black end one as they have problems with moisture ingress in the sensors also if you order a new one the wires will be longer to move it to the left hand side.

    November 18, 2012 at 10:20 am #384736
    chezza
    Participant

    Re: Samsung RS21DGrs

    tj5793 wrote:As above the thermal cut out should not be moved if you do there will be no protection for the defrost. Has the thermal fuse failed? Is the fan motor working ok? The yellow wired sensor should be replaced for a black end one as they have problems with moisture ingress in the sensors also if you order a new one the wires will be longer to move it to the left hand side.

    If, as is stated, it is an RS21, the sensor will already be on the left hand side of the evaporator

    November 20, 2012 at 1:20 pm #384737
    PGS
    Participant

    Re: Samsung RS21DGrs

    I will take another look at this one. Does ne 1 have pt no for replacement sensor. The fan is working fine now i de iced it.

    November 21, 2012 at 8:53 am #384738
    chezza
    Participant

    Re: Samsung RS21DGrs

    da32-00006w , defrost sensor

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.