- This topic has 8 replies, 3 voices, and was last updated 13 years, 4 months ago by
.
-
Posts
-
Changd a solar glow ring using part no C00228944 but get constantly so suspect wiring to temperature limiter has changed,anyone have a diagram they could let me have please.
THKS
BGRe: Hotpoint
it sound like you are mixing up the wires for the hot lamp with the wires for the ring
since the stat on this ring switches outer to inner contact if you buzz the live to the ring ( turn knob on and off to check and get it on the right side of the stat it will work
DaveRe: Hotpoint
electrofix wrote:it sound like you are mixing up the wires for the hot lamp with the wires for the ring
since the stat on this ring switches outer to inner contact if you buzz the live to the ring ( turn knob on and off to check and get it on the right side of the stat it will work
Dave
Cheers,I swapped wires on a one for one basisi and it was on constantly with controller in off position,so had to put old one back there must have been a mod diagram sometime but nothing in the box,would still like a diagram if poss please.Re: Hotpoint
heres the way i woud play it
you know the neutral is right
on new ring its term 1 (left hand side of picture) old ring bottom of picture.
so all you have to sort out is the right wire to connect to term 2 on the new ringpower off, open term block of cooker, all knobs in off position
connect 1 lead of multimeter on buzz to live of incoming cabledisconnect all three wires
in turn put other multi meter lead to each wire
after connection if it does not buzz instantly turn ring knob on and off. you are looking for a live that is switched by the controlonce you have found this connect to term 2
the other 2 wire are only a switch for the hot light so it does not matter which way round they go on terms S and H
hope it helps
Dave
- You must be logged in to reply to this topic.