Bosch WAE28468UK/13

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WAE28468UK/13

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 16, 2012 at 12:58 pm #72558
    Alanj
    Participant

    Hi Guys, can any one tell me how easy or difficult it is to do bearings on one of these machines? Would appreciate any tips if it is worth doing.

    Thanks
    Alan

    November 16, 2012 at 4:00 pm #384889
    AJC_Dave
    Participant

    Re: Bosch WAE28468UK/13

    Hi Alan

    Not much different to any other. Tub out through the front similar to a Hotpoint WF/WMA. Only real difference is a series of lugs around the tub joint which can either be knocked off with a cold chisel or if you have a dremel or the like, it will leave a tidier finish (I just knock them off). The bearing kit (about £25)comes with extra tub screws to compensate for the missing lugs. Never had a call back on one and to be honest don’t get a lot of them to do.

    Hope this helps

    Dave

    November 16, 2012 at 4:19 pm #384890
    leavemetogetonwithit
    Participant

    Re: Bosch WAE28468UK/13

    Also, when removing drum from cabinet, you will find it necessary to release suspa legs from cabinet base.
    Mike.

    November 18, 2012 at 11:00 pm #384891
    Alanj
    Participant

    Re: Bosch WAE28468UK/13

    Thanks for the reply guys. Going to look at it tomorrow so nice have the tips.

    Alan

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.