I can’t find where the blockage is on this Bosch dishwasher .
Normally on the Bosch when its over filling and emptying continuously ,I pop in a new impeller Jug and its back up and running perfectly .
But this bosch has me stumped !
No Impeller jug ! No Pressure switch that I can see .The water matrix on the side seems to be clean as a whistle .The customer was using the quick wash for all its life (3 Years ). I removed the mushroom shaped dome in the center which activates the float-switch to empty it was full of grease underneath .I thought it was the problem the machine filled and started the wash 7 times before I left the call .
The customer called to tell me it was gone back to fill/empty again .Inspiration Please !
Thanks Guys .
Kielykid
First off, tech issues should be aired in the tech forum not general trade.
Second, always give model number, very important aid in diagnosis.
Finally, if its an old model it could be a simple magnet float issue?