- This topic has 2 replies, 2 voices, and was last updated 13 years, 4 months ago by
.
-
Posts
-
This machine has been driving me nuts over the last week or so!!
Cant see where this is leaking from,i changed the float as it appeared to be heavy then thinking about it,if it was heavy then F1 would flash up.
machine pumps and the leak appears to come from the rear section of the condenser housing.Had that out,seemed ok.
So what i’m asking is,has anyone else had this before.
Dave
Re: cd60w Leaking
Not had an issue with them DAve other than in garages etc., then they’re a problem. :rolls:
K.
Re: cd60w Leaking
Looks like iv’e just nailed this!!
Underneath the lower condenser housing is the chassis of the machine in which there is a recess which was filling up with water but only after a few uses.
It turns out that when the pump was engaged,water would be forced out of the rear right fixing of the pump screw,filling this cavity up and once full would then leak onto the floor.
As anyone who has worked on these will know,you can’t look for leaks when the back is on,so I cheated,I filled up the water chamber by hand and then engaged the pump and VOILA!!Water water everywhere.
- You must be logged in to reply to this topic.