- This topic has 1 reply, 2 voices, and was last updated 13 years, 4 months ago by
.
-
Posts
-
good evening all,got a call to above w/m flashing error h43(internal leak).ive heard of these machines having this problem caused by poorly fitting door seals.does anyone know of an easy way to fit these or is there a modified better seal.i tried for hour and half but as soon as you try to fit the retaining band it pulls the seal straight off,any help appreciated. 😕
Re: panasonic na16vx1 door seal
Hi
I’ve done one and a fagor integrated machine which has a similar seal and band.
Get a couple of small f clamps. Once the seal is in place with the machine tilted back, put the band in place at the bottom of the seal and clamp it there. I then clamp it alternately up the sides of the seal until I get to the top.
A right pain but it does go on. I did think when I did the first one that there must be a special tool to fit it.
I’m sure others have different ways of doing it…..
Hope this helps..Dave
- You must be logged in to reply to this topic.