- This topic has 2 replies, 2 voices, and was last updated 13 years, 4 months ago by
.
-
Posts
-
Hi Peeps,
I have this customer with one of these Driers. On the right there is 6 LEDs. From top to bottom( R-Red, G-Green and O- Off) The Appliance is running, Stops, Beeps 3 times, Tries to start again and Stops to repeat the beeping. From the moment it starts beeping the lights shown are on.
0
0
G
R
R
0
Test Function and or documentation would be greatly appreciated.Chris
Re: Zanussi Tumble Drier TCE7127W Stopping and Beeping 3 Tim
Were you testing it with damp clothes?
E32 is a conductimetric sensor fault & so basically look at the brushes one on rear “bell” & one on front top of drum.
If it was faulty or not sensing it would shut off afetr a few seconds & not bring on the heaters.
Diagnostics are entered same as many Lux products, holding in start & nearest button while turning knob to 1st position.Re: Zanussi Tumble Drier TCE7127W Stopping and Beeping 3 Tim
There was clothes in the machine as the customer had put it on for me before I got there. Even after my arrival the machine continued for approximately 10-15 minutes before it came up with the error..made a lovely cuppa! I’ll return and try the diagnostic, thank you. Again though supporting documentation if poss would be appreciated.
- You must be logged in to reply to this topic.