Neff D/W 5943X2GB/31 Module Blown

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff D/W 5943X2GB/31 Module Blown

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 26, 2012 at 6:50 pm #72733
    Turbo
    Participant

    Hi

    Fitted a new module to this dishwasher a couple of weeks ago and it has blown in the same place again. Could someone let me know what is the likely cause of this from the photo provided.
    I did an insulation test on the heater and checked the resistance on the aqua stop inlet valve which was 2.26 on the 20k scale.

    Many Thanks

    Turbo

    November 26, 2012 at 7:10 pm #385424
    Washman
    Participant

    Re: Neff D/W 5943X2GB/31 Module Blown

    HI

    You will need to check the connection and wiring from that part of the board ,back to the component it is connected to.

    Mike

    November 26, 2012 at 8:18 pm #385425
    Martin
    Participant

    Re: Neff D/W 5943X2GB/31 Module Blown

    as Washmans says……and I wouldn’t mind betting it’ll lead to the dispenser solenoid.

    December 22, 2012 at 12:47 pm #385426
    Turbo
    Participant

    Re: Neff D/W 5943X2GB/31 Module Blown

    Thanks for your help on this one guys, it turned out to be the dispenser as you suggested.

    Thanks again.
    Graham.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.