Zanussi ZWG1120M Prod. 914579816/00

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWG1120M Prod. 914579816/00

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 27, 2012 at 4:44 pm #72755
    Alanj
    Participant

    Hi Guys, been out to this machine today. Pick program and start, machine goes straight into fast spin for 5-10 seconds then E62 comes on display. Checked heating element for earth fault but clear. Is this likely a PCB fault and hence Skip material?
    E62 supposed to be speed control promlem(faulty Triac)?.

    Alan

    November 27, 2012 at 6:01 pm #385477
    Hollytree_Technical
    Participant

    Re: Zanussi ZWG1120M Prod. 914579816/00

    Check the tacho coil and magnet on the motor, I believe that the magnet sometimes cracks, also check for dodgy wiring connections between tacho and board.

    Jem

    November 27, 2012 at 6:17 pm #385478
    Alanj
    Participant

    Re: Zanussi ZWG1120M Prod. 914579816/00

    Thanks Jem, will check these out.

    November 28, 2012 at 8:47 am #385479
    Seamy
    Participant

    Re: Zanussi ZWG1120M Prod. 914579816/00

    P.C.B to be replaced, the triac controlling motor has shorted.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.