S54M45XOGB36

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › S54M45XOGB36

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 3, 2012 at 5:14 pm #72846
    franz
    Participant

    This dishwasher wont wash , it just fills and empties , the red water tap symbol is lit but there is water entering machine . I am thinking new impellor jug required unless anyone can think of something else.

    Thanks Franz

    December 3, 2012 at 5:38 pm #385748
    nomadPaul
    Participant

    Re: S54M45XOGB36

    If it has one fitted then 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain it’ll be that !!

    December 3, 2012 at 6:45 pm #385749
    Martin
    Participant

    Re: S54M45XOGB36

    Yep the usual 424099 Impellor jug.

    December 3, 2012 at 7:17 pm #385750
    franz
    Participant

    Re: S54M45XOGB36

    Thanks Guys
    Franz

    December 7, 2012 at 4:36 pm #385751
    franz
    Participant

    Re: S54M45XOGB36

    Hi, tried a new impeller jug , no joy does that mean a new Pcb is required?
    Franz

    December 7, 2012 at 5:00 pm #385752
    Martin
    Participant

    Re: S54M45XOGB36

    The PCB relies on the signal from the Impellor jug so you can’t rule it out that’s for sure though 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time the Impellor jug cures. 😕 😕

    Have you checked for continuity between the two? I trust you fitted it the right way round?

    December 7, 2012 at 5:33 pm #385753
    franz
    Participant

    Re: S54M45XOGB36

    yes ,checked arrow on body and continuity , looks like pcb then
    Thanks Martin

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.