AZB8680 whirlpool dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AZB8680 whirlpool dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 3, 2012 at 6:52 pm #72849
    scientist
    Participant

    As soon as the dryer is switched on its an error F07. Cant find it on the site. Anyone any info??

    December 3, 2012 at 7:20 pm #385757
    Washman
    Participant

    Re: AZB8680 whirlpool dryer

    Hi

    F 07 =Drum sensor failure
    Potential causes
    Drum sensor defective
    Magnet not in correct position or missing
    Electrical connection between reed switch and control board
    Drum doesn’t turn

    Carry out reset . To carry out reset ,must be performed in 10 sec
    a)turn selector to 6 oclock pos
    b)Push start button 3 times
    C)turn selector clockwise one position (airing prog)
    D push start button 3 times

    Mike

    December 3, 2012 at 7:36 pm #385758
    scientist
    Participant

    Re: AZB8680 whirlpool dryer

    Excellent, thank you Mike.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.