- This topic has 4 replies, 2 voices, and was last updated 13 years, 3 months ago by
.
-
Posts
-
Went to have a look at this oven today and the main oven door is opening too far and I can see that the hinges are broken, only problem is I cant see how to change them?
Cheers,
RayRe: Stoves efa900h double oven
Are they drop down ones or side opening? Also its best to quote product number (050?????) as its easier searching that way.
Some of them that drop down are fixed with screws from side of oven and on inside of door, pull oven out about 6 inches & see screws securing hinges.
Theres a more difficult type which is full width range door, quite difficult to explain but I think you need to open door fully then insert a pin into hole in hinge, close slightly to remove.
Theres a nylon L shaped pin which goes in though door from outside of both hinges to release.
Door lifts right up off hinges, the part on door is normally all that needs replaced as its strained, inner parts are fiddly & springs etc to be disconnected.Re: Stoves efa900h double oven
Thanks Seamy. This one is a built in type and has a pull down door and it’s just dropping too far. I am looking at 5045171515620 on the connect website but can’t work it out if it’s the right one. Do you know if the thinner part of that hinge fits into the door or into the oven?
Thanks,
RayRe: Stoves efa900h double oven
Thinner part of the part you mention fits onto door, thicker part into oven. Fixes with screws from outside bottom of oven, pull out slightly & you can do job without taking it out completely.
- You must be logged in to reply to this topic.