called out today machine was showing F05, not emptying,
bailed out the water opened the filter out comes a colour catcher
put it back together it wont fill.
did the reset listed several times, changed the pressure switch still no joy.
put onto a program it empties gives a turn the no fill clock counts down but it wont do anything else.
i didnt even move the machine while removing the colour catcher.
Any ideas welcome.
I have seen a few do this. The blockage removed but refuses to begin again. Normally reprogram the module and it fires back o life as normal.
It’s like it gets stuck with a fault.
Would suggest leaving unplugged overnight, then before turning back on put in 1.5lt of water turn on and start the fast wash then see what it does. I can take sometime to fully reset so just leave it for a while.