- This topic has 5 replies, 3 voices, and was last updated 13 years, 3 months ago by
.
-
Posts
-
I don’t do many dishwashers and I was asked to look at this the other day whilst at a customers house.The m/c is dead (no display)and I have traced a live feed from the mains filter, through the on/off switch to the pcb.I could see no visible faults on the board but suspect this to be the culprit.
Could someone advise if these fail and are they expensive ?Allan
Re: Bosh SHV55m03GB/79 dead m/c
Yes mate , they do occasionally fail and with the symptoms you describe. It wouldn’t surprise me if when questioned , the customer says that they leave it switched on after the cycles finished. The constant supply to the power relay is a probable cause.
Re: Bosh SHV55m03GB/79 dead m/c
Thanks Paul I’ll ask if they leave it switched on.Do you know if the pcb is plug in and play or will it require any configuration ?
AllanRe: Bosh SHV55m03GB/79 dead m/c
The Control Unit will need configuring but the ‘simple to do’ instructions are included in the box as a rule. (Unless you buy from Connect that is. :rolls: )
Re: Bosh SHV55m03GB/79 dead m/c
Thanks Martin, I’ll try to get one through Qualtex. Seems odd that Connect don’t supply the instruction sheet is it not a genuine part ?
Allan
Re: Bosh SHV55m03GB/79 dead m/c
allan73 wrote:I’ll try to get one through Qualtex.
don’t you have an account with BSH? Far cheaper buying direct from them!
allan73 wrote:Seems odd that Connect don’t supply the instruction sheet is it not a genuine part ?
Many guys that use Connect say that that is often what happens. Which doesn’t surprise me as Connect are an odd bunch of ???????’s
- You must be logged in to reply to this topic.