Vibration/Banging on Spin – Gorenje WA72145

Home Forums Public Support Forums Help And Support Washing Machine Help Forum Vibration/Banging on Spin – Gorenje WA72145

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #73301
    samuelellis
    Participant

    How do

    This is a bit of an odd question, i have noticed over the last few weeks wen my washing machine starts ramping up for spin (Gorenje WA72145) the machine seems to have been making a progressively louder banging noise on each cycle.

    I have watched the machine when it goes into spin and the base of the apartment is solid and does not move BUT the higher up the cabinet you look the more it vibrates back and forth. Now if i press down on the right and side of the machine it find it does not bang and clatter as much but when looking through the window the drum moves around more.

    Now i am going to pull the machine out tomorrow and try to re-level it just incase it has gone off level somehow


    Anything else i can check before i call Gorenje out (its still under warranty but if no fault is found then i have to pay for a callout)

    #387063
    Martin
    Participant

    Re: Vibration/Banging on Spin – Gorenje WA72145

    It sounds like it simply needs levelling correctly and the feet adjusted accordingly and locked into position. Small, uneven, ‘heavy when wet’ loads are THE most causes of “banging on spin” symptoms by the way. 😉

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.