- This topic has 7 replies, 3 voices, and was last updated 21 years, 3 months ago by
.
-
Posts
-
enr r4381x1gb/01 fd 8305 strange one this runs for about 3 or 4 mins then timer goes straight to 0 checked overheat stat. there is only the thermister that i could see besides that big module anybody seen one of these.m
Re: neff t/d
Just a thought but is the condenser clear?.
Sometimes get a blockage in the tube where it attaches to the condensed water drawer.
Are there any lights flashing?
Re: neff t/d
Bleedin’ hell !!
That’s a piece of kit, a fully integrated, condensing, sensor controlled tumble dryer, and it’s over £800 😯
I’d go along with boro on that one, blokages in the pipe between the pump and water tray are the most common fault.
Apart from that :con:
Dave.
machineman wrote:but why would it lock out
The water collection chamber is full, float switch (I think) activates and tells the PCB to shut down before it floods the place.
What has her moving to Wales got to do with it ? 😆
Dave.
- You must be logged in to reply to this topic.