miele T294 C no heat Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › miele T294 C no heat This topic has 2 replies, 3 voices, and was last updated 13 years, 3 months ago by mike100. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts January 7, 2013 at 8:53 pm #73418 mike100Participant Beeps after 2/3 mins and not heating. Checked t/stat above heater el. ok. but no power to it. Where does it pick up the power ? Could mdule be fault. Thanks, Mike January 7, 2013 at 9:54 pm #387447 SeamyParticipant Re: miele T294 C no heat Sensor brushes worn perhaps, like most sensor dryers it will switch off heating after a few minutes if no damp clothing is sensed. January 8, 2013 at 6:36 pm #387448 washtronicsParticipant Re: miele T294 C no heat if there is a small pcb at near the mains filter then this may be the fault. When testing make sure you have wet laundry otherwise it will turn off as well. Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In