dishwasher fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › dishwasher fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 22, 2013 at 3:38 pm #73699
    abbots
    Participant

    Hi,
    had a look on forum but cant find answer to this particular model number.

    Baumatic B/I dishwasher

    BHD5
    020230843
    DW-24EI
    ESF20020517

    machine starts fine, goes for over 30 mins, heats water fine and then starts to beeb after it has drained, when door opened it appears to be on the dry cycle , no water in.
    looking from L-R these lights are on/flashing.

    LED 1 & 2-flashing
    LED3 & 4 -alternatively flashing
    LED 5 & 6-on

    when you
    any help would be much appreciated.
    john

    January 31, 2013 at 7:27 pm #388474
    abbots
    Participant

    Re: dishwasher fault

    hi,
    struggling with this one, can anyone tell me if there are any thermal limiters or ntc devices on the machine, i can’t seem to get any info. on this at all.
    if there is can you give me some part numbers please, i’ll try changing them all if neccessary.
    cheers.
    john

    February 4, 2013 at 8:38 pm #388475
    deltra
    Participant

    Re: dishwasher fault

    hi, saw one a long time ago…. i seem to remember that there was the resetable type of stat in base(accessable from front base panel) saved a lot of heartache!!!! hope yours is the same…

    February 4, 2013 at 10:37 pm #388476
    abbots
    Participant

    Re: dishwasher fault

    cheers,
    i’ll have a look because i’m not getting very far with this.
    jk

    April 17, 2013 at 6:37 pm #388477
    abbots
    Participant

    Re: dishwasher fault

    hi,
    still struggling with this one.
    can anyone tell me approx. resistance value of the NTC situated in the front door please.
    cheers.
    john

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.