- This topic has 4 replies, 3 voices, and was last updated 13 years, 2 months ago by
.
-
Posts
-
hi lads first time looked at one of these , no motor action . took back off took bolts out of motors but cant get them off , tiped machine back / an see couple of bolts behind front casing , do these hold the motors in place to ? if so how do you get to them , i have took soap draw out unsrewed facier . but cant get front casing off it looks like it should hook off .tho , but had no joy , any other screws parts need to remove to get it off , help lads goin back morn , :rolls:
Re: dyson contratator
Hi,
There are only those two bolts holding the motor on.
You don’t have to take the front off.
Once you take the bolts off the motors they are indeed a very tight fit on the plastic moulding.
The only way I have found to get them off is to use a flat headed screw driver fitted in between the motor and the mounting to prize them off, a bit of wd40 helps.
(A bit of course language and sweating also helps.)
- You must be logged in to reply to this topic.