Beko wm6143b stops mid cycle

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko wm6143b stops mid cycle

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 4, 2013 at 10:07 am #73942
    stepeheno
    Participant

    Hi all,

    Hoping for a bit of advice on the above.

    On commencing a cycle I can hear the audible click of the door lock engaging, the machine fills with water fine, but then just sits there.

    What is it checking or trying to do at this point, turn the drum? Heat the water?

    I have already:
    Checked / cleared filter and impeller is not stuck and machine is able to drain ok
    Motor brushes have loads left on them and wiring to motor has continuity

    It did this a few weeks ago and I took the pcb out, it had a couple of joints to a connector were very slightly blackened so I cleaned and re flowed them with solder and that seemed to fix it… Until last night that is.

    Any pointers anyone?

    Many thanks
    Steve

    February 4, 2013 at 10:45 am #389404
    Martin
    Participant

    Re: Beko wm6143b stops mid cycle

    Yep!….check it all again. Either one that you mentioned can cause those symptoms…go for it!

    February 4, 2013 at 1:49 pm #389405
    stepeheno
    Participant

    Re: Beko wm6143b stops mid cycle

    Anywhere to get service manuals or schematic to narrow down the testing?

    February 4, 2013 at 2:21 pm #389406
    Martin
    Participant

    Re: Beko wm6143b stops mid cycle

    Doubt it, it’s a Beko don’t forget and probably never got translated from Turkish.

    February 4, 2013 at 8:24 pm #389407
    stepeheno
    Participant

    Re: Beko wm6143b stops mid cycle

    It’s started working again of it’s own accord tonight.. wonder how long for this time!

    February 7, 2013 at 11:14 pm #389408
    mohaliboys
    Participant

    Re: Beko wm6143b stops mid cycle

    Position the dial at 90 degrees and pressing the start button turn on the machine..Let me know which lights are on and which are off??

    February 11, 2013 at 10:00 pm #389409
    stepeheno
    Participant

    Re: Beko wm6143b stops mid cycle

    Thanks for the reply, it’s actually been working fine ever since but if the fault comes back I’ll do what you suggested and post back what the lights are doing!
    Thanks again

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.