Neff d/washer S5453X1GB/50

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff d/washer S5453X1GB/50

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 5, 2013 at 2:34 pm #73980
    jenson
    Participant

    hi,looking at this one today an it is overfilling for starters an flooded base,emptyed base an tryed again,it over overfills and pumps out,it does all this with door open or closed and the first 4 lights ( outta five) are flashing,cannot reset program either,any ideas chaps,,

    February 5, 2013 at 4:45 pm #389513
    Martin
    Participant

    Re: Neff d/washer S5453X1GB/50

    I think the PCB may be the problem here? Take a close look at the board for surface damage.

    February 5, 2013 at 4:57 pm #389514
    jenson
    Participant

    Re: Neff d/washer S5453X1GB/50

    hi thanks martin,no visible damage on boards,best i price up a couple of boards then

    February 5, 2013 at 4:59 pm #389515
    Martin
    Participant

    Re: Neff d/washer S5453X1GB/50

    Hmmmm…? Better you take another look first I reckon, especially the triacs.

    February 6, 2013 at 1:21 pm #389516
    jenson
    Participant

    Re: Neff d/washer S5453X1GB/50

    would you expect to see damage or slight burning on these boards martin,cause iv had both out and no sign of that at all.

    February 6, 2013 at 1:56 pm #389517
    Martin
    Participant

    Re: Neff d/washer S5453X1GB/50

    jenson wrote:would you expect to see damage or slight burning on these boards martin,cause iv had both out and no sign of that at all.

    I’m thinking the top of a triac has blown being as you cannot reset the PCB.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.