BOSCH SRS4302GB/10

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BOSCH SRS4302GB/10

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 7, 2013 at 5:53 pm #74028
    chitts
    Participant

    I’ve got a strange fault on this machine. It fills fine on “Quick Wash” main wash and 1st & 2nd rinse then fails to fill on final hot rinse with wash pump “hunting” as though it’s full. On “Normal” prog. it does pre-wash then same problem. All regular things have checked ok, no blockages,pressure system clear, harness ok. Customer keeps it clean and tidy.
    Machine has had mod. done by Bosch some time ago and it’s worked fine since then.
    Any clues please.

    February 7, 2013 at 6:01 pm #389667
    Martin
    Participant

    Re: BOSCH SRS4302GB/10

    Typical oversudsing issue I reckon.

    February 8, 2013 at 5:09 pm #389668
    chitts
    Participant

    Re: BOSCH SRS4302GB/10

    Don’t think so, as it does it on test, with no detergent or crockery every time.
    What was the Bosch mod. Can you tell me?
    I’m beginning to think it’s Module fault as everything test ok.

    February 8, 2013 at 5:21 pm #389669
    Martin
    Participant

    Re: BOSCH SRS4302GB/10

    Yes Bosch replace the module using agency work.

    February 8, 2013 at 5:38 pm #389670
    Martin
    Participant

    Re: BOSCH SRS4302GB/10

    Thinking about it again I wonder if the salt valve is open circuit? That should be activated at the start of the final rinse……hmmm?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.