- This topic has 4 replies, 3 voices, and was last updated 13 years, 1 month ago by
.
-
Posts
-
Candy CDB754d with no power to the dryer solenoid. Last time I had this fault on the later Candy W/d’sit was the board, this time tested the lot but getting nothing at the board when the dryer is on. Ordered a board direct from Gias which arrived resealed with packing tape after it had been opened. Noted this with the spares desk.
Changed the board still no power to the solenoid. Now not sure if it’s a returned duff board or I still haven’t cracked the fault. I thought it was just a straight 240v fom the pcb edge connector all the time it’s drying, but anyone with experience of these point me in the right direction.
Just to recap, there is mo power from the edge connector on the pcb to the valve.
Tony
Re: Candy CDB754D dryer sol. valve fault.
How long into the drying cycle is it before the valve is energised?
Just a thought as some don’t kick in for a few minutes although not sure about this model
Re: Candy CDB754D dryer sol. valve fault.
I’ve left it for a good while but doesn’t power up. Every time I visit the dryer stat is tripped ……..even though they don’t use the dryer while it’s faulty :rolls:
Tony
Re: Candy CDB754D dryer sol. valve fault.
I’m wondering if it isn’t something simple like that ruddy Selector Switch? (41014502)?????
- You must be logged in to reply to this topic.