Belling 787SS Oven – partly heating

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Belling 787SS Oven – partly heating

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 11, 2013 at 10:54 am #74075
    ovenfix13
    Participant

    Hi,

    Have a Belling 787SS single fan oven, partly heating to about 50-70 deg max very slowly over a long period (30-60mins) rather than preheating to 200deg in 10mins.

    Red ‘heating’ light on.

    Would you suspect element, even if partly heating…?

    Cooker is rated at 3.4kW, yet recommended spare part replacement for element is only 2.2kW – this leads me to suspect two elements i.e. second one at fan – is this correct??? I haven’t opened to inspect yet!!

    What is the approx correct value for main element resistance (20-30ohm?)

    Many thanks 🙂

    February 11, 2013 at 12:03 pm #389856
    Washman
    Participant

    Re: Belling 787SS Oven – partly heating

    Hi

    There are 2 elements 1 for fan oven and 1 for grill, so total is correct. Is the fan inside running when set to oven cook.
    If fan not running oven will not get to temperature.

    Washman

    February 11, 2013 at 12:34 pm #389857
    ovenfix13
    Participant

    Re: Belling 787SS Oven – partly heating

    Hi Washman,

    Many thanks for quick reply!

    Yes, fan runs when oven set to cook.

    Oven heating – with or without fan – grill warms up, but oven doesn’t reach temp.

    So looking more like main element – presuming this is replaced from rear panel removal rather than below?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.