- This topic has 3 replies, 2 voices, and was last updated 13 years, 1 month ago by
.
-
Posts
-
model b1451n1gb I have fitted hinges and hinge guides but door will not close firmly!! This should be a straight forward job but I am at a loss !! Any thoughts would be welcome> the part numbers of hinges are 481568 and 267845
Re: Neff Single Oven hinge replacement
I have no clue what could be the problem TBH. Both the hinges and the hinge bearings (172647) can only be fitted one way with no adjustment. And assuming the hinge is fully located into the bearing socket and the latch retracted it should have sufficient tension in the springs in order to sit tight flush to the door gasket. The only reason I have ever replaced the hinges is when one or both springs lose their tension and don’t fully close. New hinges should be well tensioned……..all very odd.
Have you tried refitting the old hinge bearings? I never had need to replace them as a rule, so might be worth trying?
- You must be logged in to reply to this topic.