Beko Washing Machine weird pipe to suspension

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko Washing Machine weird pipe to suspension

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 19, 2013 at 1:20 pm #74216
    neilsukwg
    Participant

    😕 Beko WM6143B

    Got a leak from right hand side

    Upon inspection it seems to come from the bottom of the right hand suspension leg to which a pipe from the pump is connected?

    Completly baffled..is this some kind of diy madness by a previous owner or a kind of pump powered hydraulic system peculiar to Beko? 😕

    February 19, 2013 at 6:30 pm #390477
    BobHope
    Participant

    Re: Beko Washing Machine weird pipe to suspension

    only 3 pipes attached to the pump filter unit, 1 the sump hose, 2 the drain hose, 3 the filter draindown hose, small black pipe that should be blocked off with a plastic bung.

    Bob.

    February 19, 2013 at 6:54 pm #390478
    neilsukwg
    Participant

    Re: Beko Washing Machine weird pipe to suspension

    Thanks I thought as much but at the time no one would admit to having looked at the machine. I think they have lost the drain hose bung and jammed the draindown hose onto the nearest part they could reach, in this case the peg on the bottom of the suspension leg. Being extra careful as its in an upper flat.

    Thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.