EW1200I – advice on wiring

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › EW1200I – advice on wiring

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 23, 2013 at 5:31 pm #74288
    vinotinto
    Participant

    Hi all
    The washing machine stopped spinning on any cycles,took back off to check motor, and the belt has snapped but also dragged some wires in – – a white wire in which snapped ( ive found the other end) but more of a problem is the earth (green/yellow) wire which looks to have been pulled out of several connections. Ive checked everywhere looking for schematics to try and work out where to put wires back but no success. Any ideas where I might find this or any advice available on rewiring? Cheers

    February 23, 2013 at 5:56 pm #390788
    Martin
    Participant

    Re: EW1200I – advice on wiring

    There are several earth points on the motor and heater. All are linked and can be reconnected fairly easily with crimp connectors. Likewise the broken white wire in exactly the same way. 😀

    February 23, 2013 at 6:28 pm #390789
    vinotinto
    Participant

    Re: EW1200I – advice on wiring

    Thanks Martin I’ll take another look and see if I can figure it out.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.