Replacing waste hose on Hotpoint DC25 slimline dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Replacing waste hose on Hotpoint DC25 slimline dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 24, 2013 at 1:41 pm #74298
    Procrastinator
    Participant

    I’ve been given a Hotpoint DC25 slimline dishwasher which needs a new waste hose. Advice on various forums is “remove base plate to access pump and hose”.

    I’ve removed the front trim panel and the two screws holding the front of the base plate. By lowering the base a small amount I can see where the waste hose hose connects to the pump.

    However, I cannot move the plate any further. What else do I need to dismantle to remove the plate and gain access to the pump and hose?

    Any help would be welcome before I lose the will to live.

    February 24, 2013 at 2:02 pm #390829
    Martin
    Participant

    Re: Replacing waste hose on Hotpoint DC25 slimline dishwashe

    Lid off, left hand side panel off. Drain hose connects to fill matrix seen once the side panel is removed. Easy from there onwards…….. 😀

    February 24, 2013 at 5:30 pm #390830
    Procrastinator
    Participant

    Re: Replacing waste hose on Hotpoint DC25 slimline dishwashe

    Thank you Martin, that’s a huge help.
    One further query however. The DC25 is not listed in the UK Whitegoods online parts shop. Is the part number for the hose 1800033?
    The only reference I can find to the DC25 is in the Ransom Spares parts listing.

    February 24, 2013 at 6:29 pm #390831
    Martin
    Participant

    Re: Replacing waste hose on Hotpoint DC25 slimline dishwashe

    Yes that’s the one. :tup:

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.