Baumatic B187SS Cooling Fan Problem

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Baumatic B187SS Cooling Fan Problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 18, 2013 at 3:34 pm #74620
    buges
    Participant

    Hi

    I’ve just picked up a secondhand Baumatic B187SS oven, which i suspect has a problem with the cooling fan.

    The cooling fan comes in straight away as soon as i turn the oven on & goes off instantly when i turn the oven off.

    After a bit of searching i’ve found out that there are 2 temp sensors connect to the cooling fan circuit. I took the back & top off & removed 1 wire from each sensor & did a continuity test with a multimeter. The sensor at the back of the oven has continuity & the markings 25-02 145c & the sensor on the top of the oven near the Thermostat is open circuit & has no markings at all.


    Any help would be great.

    Thanks

    March 18, 2013 at 4:29 pm #392297
    kwatt
    Keymaster

    Re: Baumatic B187SS Cooling Fan Problem

    So far as I can see that’s what it should do.

    According to the wiring diagram there is only the main oven thermostat and a safety cut out, no monitor stats are fitted.

    K.

    March 18, 2013 at 6:00 pm #392298
    buges
    Participant

    Re: Baumatic B187SS Cooling Fan Problem

    Thanks for the reply kwatt.

    I’ve never had a baumatic before, just seems weird that it’s on all the time & not running to cool the oven down after it’s switched off.I’ll give them a ring tomorrow & ask want the correct operation should be for the cooling fan.

    Thanks for the reply

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.