Zanussi ff cutting out.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ff cutting out.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 20, 2013 at 4:17 pm #74660
    subs
    Participant

    Zx79/5si prod928405921
    Got a call to this ff for letting agency saying not freezing fully.
    When I got there all the lights were flashing on the controls inside.
    I unplugged it and powered it back up and the compressor kicked in. I noticed the condenser fan was coming on and off every 15 seconds or so, then, after about 4-5 minutes the compressor cuts out. Then 3-4 minutes later it cuts in again with the condenser fan cutting in and out and then the compressor cuts out again. It does this over and over again. The tempreture in fridge and freezer are almost correct. Freezer just about -18.
    The compressor’s overload is not tripping.
    I’m thinking board.

    Any ideas please?

    Thanks

    Subs

    March 21, 2013 at 6:22 am #392426
    captaincaveman1
    Participant

    Re: Zanussi ff cutting out.

    Could be the board but the three lights flashing on the left also means NTC failier.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.