iwdc6105

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › iwdc6105

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • March 25, 2013 at 7:15 pm #74737
    clockworkone
    Participant

    indesit washer dryer. will abort wash about 5min into any wash or dry program.meggered both elements and they are ok. drain pump checks out ok. all lights flashing and on. could dryer ntc or wash heater ntc cause this fault. brushes like new. machine used once or twice a week. just over 2 year old.paul

    March 25, 2013 at 7:29 pm #392691
    iadom
    Moderator

    Re: iwdc6105

    The dryer ntc’s are known to cause weird faults on these and the Hotpoint clones. 🙁


    Sent from my iPad using Tapatalk HD

    March 25, 2013 at 7:38 pm #392692
    clockworkone
    Participant

    Re: iwdc6105

    Thanks Jim. Cant seem to find part no for dryer ntc though.

    March 25, 2013 at 7:50 pm #392693
    iadom
    Moderator

    Re: iwdc6105

    C00290251. 🙂

    March 25, 2013 at 8:35 pm #392694
    clockworkone
    Participant

    Re: iwdc6105

    Thanks again.

    March 28, 2013 at 7:17 pm #392695
    clockworkone
    Participant

    Re: iwdc6105

    Is dryer ntc c00290251 the only one listed for this model as old ntc is a standard wash heater type and not the staggered type.paul

    March 28, 2013 at 7:35 pm #392696
    iadom
    Moderator

    Re: iwdc6105

    Wash ntc is C0083915

    March 28, 2013 at 8:53 pm #392697
    clockworkone
    Participant

    Re: iwdc6105

    old dryer ntc on left, new on right.

    March 28, 2013 at 10:09 pm #392698
    iadom
    Moderator

    Re: iwdc6105

    The early type has been superseded by the stepped one.

    March 28, 2013 at 10:27 pm #392699
    clockworkone
    Participant

    Re: iwdc6105

    Thank you Jim. just wanted to be sure.Paul

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.