miele G665 i

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › miele G665 i

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 29, 2013 at 8:20 am #74800
    mike100
    Participant

    Not enough water seems to be entering cabinet. Wash pump working ok. Checked for bits in impeller ok. Pressure switch tube clear.

    There is another pressure switch on wash pump. Could that be problem.

    Mike

    March 30, 2013 at 6:30 pm #392946
    electrofix
    Moderator

    Re: miele G665 i

    is it coming up with any fault codes ?

    Dave

    March 31, 2013 at 9:36 am #392947
    eastlmark
    Moderator

    Re: miele G665 i

    mike100 wrote:Not enough water seems to be entering cabinet. Wash pump working ok. Checked for bits in impeller ok. Pressure switch tube clear.

    There is another pressure switch on wash pump. Could that be problem.

    Mike

    no, this switch only brings the heater on when the wash pump pressure is correct. Normally get a inlet/drain light on if there is a problem with filling.

    March 31, 2013 at 7:19 pm #392948
    mike100
    Participant

    Re: miele G665 i

    no error codes.
    can hear water entering cabinet but when wash pump activates can see there is not enough water inside to circulate

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.