- This topic has 3 replies, 3 voices, and was last updated 13 years ago by
.
-
Posts
-
Hi Folks,
Bumped into this one last job yesterday.Been to a few of this model before but never anything too challenging. This one is completely dead. I have established that mains is as far as the board but thats about it. Is there a kind person out there that could let me have the service info off TDS ( I do have TDS but mines not recent enough and I dont want to invest as I retire before too long). Also any common problems that these suffer from if Dead might be handy.
All contributions gratefully received.
Regards,
Mike
Re: Zanussi ZWD16270W1 PNC 9191460403000 Washer Dryer
There is no ‘recent’ version of TDS. There has not been one for a few years now. New tech info only available online for authorised agents.:(
Sent from my iPad using Tapatalk HDRe: Zanussi ZWD16270W1 PNC 9191460403000 Washer Dryer
Thanks Jim.
Reading the other posts it looks like this job wont be going very far.
I very much appreciate your prompt response.
Regards,
Mike
Re: Zanussi ZWD16270W1 PNC 9191460403000 Washer Dryer
Mike, I would suggest that the board has failed. I have had numerous ones that have died for no apparent reason although you’d need to inspect the board visually to ensure nothing has blown & if it has you’d need to find what the blown area of the board controls. That said, I have had some where a low insulation dry heater could cause a dead display so you may want to disconnect the dry heater first.
Hope this helps.
- You must be logged in to reply to this topic.