ISE10 1606

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › ISE10 1606

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 3, 2013 at 11:20 am #74853
    Alanj
    Participant

    Hi Guys, been out to this machine today. The machine fills with water and sits about 30 secs then drains, machine stops and program shows in display. No error code. If you pick a spin program, machine pumps out but no spin or drum action and machine stops and goes back to start. I’m thinking motor or motor control unit.
    I tried putting into test mode and lights around selector knob all flash and the L1,L2 & L3 are lit on start button.
    Any ideas?

    Alan

    April 3, 2013 at 9:25 pm #393091
    deltra
    Participant

    Re: ISE10 1606

    Hi, had one doing exact same thing! Changed motor , ran ok for a couple of days,then re faulted! Changed inverter board,and that cured it

    April 3, 2013 at 10:34 pm #393092
    Alanj
    Participant

    Re: ISE10 1606

    Thanks Deltra.

    April 5, 2013 at 9:38 pm #393093
    Alanj
    Participant

    Re: ISE10 1606

    Does anyone know what components go faulty on the 1606 motor inverter board. Anyone tried repairing one?

    Alan

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.